Products

List of All Products

PART / KIT DESCRIPTION

Automatic Header Control

Automatic header height control bundles

LAN0310045

Cross bearing replacement kit that connects two yokes, and allows for articulated movement.

LAN043439

Spring kit that can be added to the radial pin clutch on the belt pick-up head drive shaft (LAND350), to create more tension on the clutch.

LAN101050S

Heavy duty lift cylinders for John Deere® 50 Series STS combines.

LAN10107

Heavy duty lift cylinders for John Deere® 60 and 70 Sereies STS combines.

LAN101B

Sprocket to spline adapter for adapting new heads to earlier model combines.

LAN106271

1½", 23 spline, 1000 RPM yoke. Adapts a corn head to a John Deere® self propelled silage cutter.

LAN106A2206

1⅜" x 6", 6 spline, 540 RPM stock shaft.

LAN106A2221

1⅛" x 6", 21 spline, 1000 RPM stock shaft.

LAN125975

Replacement bearing for pre-cleaner chaffer.

LAN1261800

1⅛" x 5" hex connector with 2 set screws. Fits over 1⅛" hex shafts.

LAN126200

1¼" x 5" hex connector with 2 set screws. Fits over 1¼" hex shafts.

LAN165407-30

Serrated feed accelerator wear plate for John Deere® combines.

LAN166915

Dark or light blue coupler for reel aft or reel fore function.

LAN166916

Red coupler for reel drive function.

LAN166917

Yellow coupler for reel return function.

LAN166918

Green coupler for reel lift function.

LAN166987

1/2" coupler O'ring seal repair kit for large (1/2") couplers.

LAN166988

3/8" coupler O'ring seal repair kit for small (3/8") couplers.

LAN166990

Single point coupler block with no couplers.

LAN166991

Complete single point block (all functions).

LAN166992

Single point block with reel fore function only.

LAN166993

Single point block with reel fore and reel aft functions.

LAN166994

Single point block with reel drive and reel return functions.

LAN166995

Single point block with reel drive, reel return, and reel lift.

LAN166996

Single point block with reel drive function only.

LAN166997

Single point block with reel fore, reel aft, reel drive, and reel return.

LAN166998

Single point coupler with reel lift function only.

LAN16801800

1⅛" x 3" hex connector with Allen screw.

LAN204628

Feeder house hook kit to convert a level land combine to the new hook style.

LAN204828S

Coupler block storage bracket. (hardware included)

LAN209

Electrical adapter to connect a John Deere®600 Series head to a 50 Series Combine.

LAN223919-5

Discharge beater wear plate kit. (set of 5)

LAN2615120

Drive shaft locking collar replacement kit.

LAN2P5065-2AFC

Single point coupler block for CNH® corn headers.

LAN2P5065-5AFC

Single point coupler block for CNH® platforms.

LAN312410

Cross bearing replacement kit that connects two yokes, and allows for articulated movement.

LAN340-12635

Top link cylinder kit for 3-point hitch.

LAN350311052

1⅜", 21 spline, 1000 RPM Weasler® quick coupler yoke.

LAN353511001

1⅛" Weasler® hex compression yoke

LAN362448

1¾", 21 spline, 1000 RPM quick coupler yoke.

LAN368184

1¼", hex yoke with compression connection.

LAN380907

1⅜", 7 spline, 540 RPM quick coupler yoke.

LAN380908

1⅜", 21 spline, 1000 RPM quick coupler yoke.

LAN381908

Drive shaft locking collar replacement kit.

LAN390404

Plastic locking collar replacement kit for 2400 Series Walterschied® driveline.

LAN390985

1⅛" hex yoke with locking ball quick coupler connection.

LAN391345

1⅜", 1000 RPM yoke. Adapts a Shelbourne® stripper head to a John Deere® combine.

LAN394470

Replacement shield for the header side of Walterscheid® 2400 Series drive shaft.

LAN394634

Replacement shield for the combine side of Walterscheid® 2400 Series drive shaft.

LAN396059

Full combine Walterscheid® drive shaft half with quick coupler.

LAN396060

Walterscheid® full header drive shaft half with compression coupler.

LAN399515

1⅛" hex compression yoke

LAN3P5065-5EMC

Single point coupler block for the combine side of CNH® headers.

LAN508172

Replacement gearbox for John Deere® 40 and 90 Series corn heads.

LAN560

Single point combine electrical dummy plug and plate for John Deere® combines.

LAN79944

Corn head ear saver kit.

LAN80987

Corn head wedge kit for John Deere® 40, 90, and 600 Series corn heads.

LAN84108

Single point hydraulic and electric kit for John Deere® corn heads.

LAN84108G

Geringhoff® corn head to John Deere® combine adapter kit.

LAN84108NE

Single point hydraulic kit for John Deere® corn heads. (non electric)

LAN84108R

Single point hydraulic and electrical kit for corn heads with corn reel.

LAN84111

John Deere® pick-up head to single point hydraulic and electrical connection conversion kit.

LAN84111NE

John Deere® pick-up head to single point hydraulic connection conversion kit. (non electric)

LAN84112

Single point hydraulic and electric conversion kit for Draper heads.

LAN84118

Single point to multi-point corn head conversion kit for 2004 or newer model John Deere® 90 and 600 Series corn heads (beginning with serial # 705201).

LAN84118NE

Single point to multi-point corn head conversion kit for 2004 or newer model John Deere® 90 and 600 Series corn heads. (non electric)

LAN84122

Draper head single point to multi-point conversion kit

LAN84151

Single point hydraulic and electric kit for cutting platforms with reel and fore aft.

LAN84151MD

Adapts MacDon®: headers with multi-point hydraulics to John Deere® single point combines.

LAN84151NE

Converts a cutting platform with reel fore and reel aft to single point hydraulics. (non electric)

LAN84152

Converts heads prior to John Deere® 600 Series (without hydraulic reel fore and reel aft) to John Deere® 60 and 70 Series combines.

LAN84152NE

Converts John Deere® cutting platform heads without reel fore and aft to single point hydraulic connection. Electrical harness not included.

LAN84206

Change John Deere® 600 Series platform heads from single point hook up back to multi-point hook up.

LAN84206NE

Convert your single point header to multi point hydraulic connection. This kit does not include the electrical harness.

LAN84207

Add single point hydraulic connection to John Deere® 50 Series STS combines.

LAN84208

Add single point to John Deere® 50 Series Walker combines.

LAN84209

Adds single point hydraulic and electrical connection to a John Deere® 50 Series Walker combine.

LAN84209NE

Convert your John Deere® 00 or 10 Series combine to hydraulic single point. (no electrical)

LAN84211-1.5

A wedge kit that allows for a proper cutting bar angle on John Deere® 900 Series and 600 Series heads (through 2004 models).

LAN84211-3

A wedge kit that allows for a proper cutting bar angle on John Deere® 900 Series and 600 Series heads (through 2004 models).

LAN84211-4.5

A wedge kit that allows for a proper cutting bar angle on John Deere® 900 Series and 600 Series heads (through 2004 models).

LAN84212/213K

Convert your John Deere® 9000, 9010, or 9050 Series narrow body Contour-Master™ combine to the new hook style for John Deere® 600 Series heads. This kit fits all narrow body and STS combines, excluding side hill combines.

LAN84212K

Convert your John Deere® 9000, 9010, or 9050 Series wide body Contour-Master™ combine to the new hook style for John Deere® 600 Series heads. This frame fits the wide body combines, excluding side hill combines.

LAN84214-N

Adapts new John Deere® 600 Series heads (both corn and platform) to level land John Deere® 50 and 9000 Series narrow body combines.

LAN84214-W

Adapts new John Deere® 600 Series heads (both corn and platform) to level land John Deere® 50 and 9000 Series wide body combines.

LAN84398

Adjust the cutter bar angle on your John Deere® 600 Series platform head. Complete kit contains three different wedge angles; 1.5, 3, and 4.5 degrees.

LAN84398 - 1.5

Adjust the cutter bar angle on your John Deere® 600 Series platform header. This kit contains a 1½ degree wedge angle.

LAN84398 - 3

Adjust the cutter bar angle on your John Deere® 600 Series platform header. This kit contains a 3 degree wedge angle.

LAN84398 - 4.5

Adjust the cutter bar angle on your John Deere® 600 Series platform header. This kit contains a 4½ degree wedge angle.

LAN84SSH

Convert the hydraulics and electrical connections of a Shelbourne® stripper head to single point hook up on John Deere® 60 and 70 Series combines.

LAN9225498

Full header drive shaft half with compression coupler.

LAN9325498

Full combine drive shaft half with quick coupler.

LAN9625498

Replacement shield for the header side of Weasler® 44 Series drive shaft.

LAN9725498

Replacement shield for the combine side of Weasler® 44 Series drive shaft.

LANAP200

Adapts late model John Deere® 900 Series platform heads with hex back shafts to new John Deere® telescoping drive shaft technology.

LANAP202

Adapts John Deere® 200 Series and older 900 Series (with serial numbers below 635100) platform heads to new John Deere® telescoping drive shaft technology.

LANAP300

Convert ALL older style pick-up heads to new John Deere® 60 and 70 Series, 50 Series Contour-Master™, or 9000 Series Contour-Master™ combines.

LANAR100

Adapts earlier model heads (with hex back shafts) to the newer John Deere® 50, 60, and 70 Series combines that are either rigid or Contour-Master™.

LANAUG702K

Unloading auger extension for John Deere® 50 Series and older combines (model numbers 6620 to 9750). Gain 2½ to 3 feet of reach. Not for use with John Deere® 60 and 70 Series high capacity unloading augers.

LANAUGCIHK

Unloading auger extension for Case IH® 1466-2588 combines. Gain 2½ to 3 feet of reach.

LANAUGHURK

Extend the reach of your high unload rate auger 48 inches with a simple to install extension kit.

LANB300

Sprocket to spline adapter kit. Adapts new model heads to earlier model combines.

LANB3800

Sprocket drive level land combines attach to Contour-Master™ heads with this shaft.

LANB540

540 RPM, 6 splined male 1⅜" to spline adapter kit for use on John Deere® 00 or 10 Series level land combines.

LANC400

Sprocket to clutch hex adapter kit for John Deere® rigid and flex heads.

LANCIH719546006

Tow cable kit for Case IH® STX tractors, models 330-535 with serial number above Z7F108001.

LANCIHTC3708

Tow cable kit for Case IH® Steiger 350/400/450/500/550/600 tractors.

LANCSR9000

Tool for cylinder reversal on John Deere® Walker combines.

LAND251

Heavy duty replacement drive shaft that is utilized on the late model platform heads that drive from the left side only.

LAND255

Replacement drive shaft that utilizes a 1⅜", 6 spline, 540 RPM quick coupler on the combine side, and a 1⅛" hex compression connection on the header side.

LAND300

Replacement drive shaft used to convert John Deere® corn or platform heads to the Case IH® combines.

LAND350

Replacement drive shaft that utilizes a 1⅜", 21 spline, 1000 RPM quick coupler on the combine side, and a 1⅛" hex quick coupler on the header side (secures the coupler to the jackshaft) with a built in radial pin slip clutch.

LAND450

Replacement drive shaft that utilizes a 1⅜" 21 spline quick coupler on the combine side, and a 1⅛" hex coupler with compression connection on the header side (uses a 1/2" bolt that secures the coupler to the jackshaft).

LAND475

Replacement drive shaft for John Deere® 600 Series, 35 foot platform heads that drive from the left side only.

LAND60X

Replacement drive shaft for new John Deere® chopping corn heads.

LANDBH

Discharge beater slug removal tool for STS combines.

LANDX250

Drive shaft that is designed to fit on the 1¼" shaft of larger corn heads.

LANEC100

Electrical adapter for early model corn heads to John Deere® 50 and 60 Series combines. Header height will not work on John Deere® 70 and newer Series combines.

LANEC200

Electrical adapter to adapt new John Deere® 50 and 60 Series heads to 9000 and earlier model combines. This adapter is for lights only. The header height will not work.

LANEC300

A 31 pin adapter cable to adapt from standard 31 pin header cable to new John Deere® 60 and 70 series 31 pin single point hook up.

LANEC302

Adapt early model corn head without hydraulic deck plates to John Deere® 60 and 70 Series combine.

LANEC550

"Dummy plug" for use with John Deere® 50 Series combines when no electric functions are nedded on the head. Tricks the combine into thinking there is a head attached.

LANEC560

"Dummy plug" for use with John Deere® 60, 70, and S Series combines when no electric functions are needed on the head. Tricks the combine into thinking there is a head attached.

LANFSR10

Feed accelerator slug removal tool for STS combines with 5 foot leverage bar.

LANFTJD00

1,000 gallon, 4 wheel drive tractor mounted fertilizer tank.

LANGD200

Use on John Deere® flex heads to separate standing crop from the material being cut.

LANH22104X

Set of six left and six right stainless steel cover plates mounted to wide spread tailboard spinner blades.

LANHBO-JD10-31Q

Header interface kit that converts the electronics of 2004 and newer John Deere® HydraFlex™ heads to 1999 or older John Deere® combines.

LANHP200

Drive shaft hanger bracket kit for platform heads with hex shafts.

LANHP202

Drive shaft hanger bracket kit for John Deere® 200 and early 900 Series platform heads. Drive shafts and adapters are also necessary for this conversion.

LANHPO-JD10-31J

Header interface kit that converts the electronics of 2000-2003 John Deere® 900F Series flex heads to 1999 or older John Deere® combines.

LANHR100

Hangar bearing kit for each side of a corn head.

LANHR100.5

Hanger bearing kit for corn heads driven on the left side only.

LANHS12

1⅛" hex shaft 12" long with groove to connect the drive shaft to.

LANHT140D

40 foot, DOT compliant header trailer. Available in black, green, or red.

LANJD2CIH

Adapt all JD heads to Case IH Combines from 1440 - 2388 models.

LANJDHMA

3-point header mover that attaches to tractor for convenient storage and transport of combine heads.

LANPHUV10

Planter hitch conversion from a 2-point mount to the drawbar.

LANPSP100K

Stainless steel corn snout protector kit for John Deere® 90 Series corn heads up to serial number 695300.

LANPSP200K

Stainless steel corn snout protector kit for John Deere® 90 Series corn heads above serial number 695300.

LANPSP600EK

Stainless steel corn snout protector plates to cover the end snouts on John Deere® 600 Series corn heads.

LANPSP600K

Stainless steel corn snout protector kit for John Deere® 600 Series corn heads.

LANPW7000

Extremely durable planter/seeder mud wheel. This tire uses the "through" bearing for 5/8" bolt.

LANPW7000S

Extremely durable planter/seeder mud wheel. This tire uses the "shaft" bearing.

LANPW7000XP

Extremely durable planter/seeder mud wheel. This tire uses the "through" bearing for 5/8" bolt.

LANPW777K

Equip your standard planter tire with Lankota's spoked gauge wheel rims and spoke stiffener. Hardware included.

LANPW7XPK

Equip your standard planter tire with Lankota's spoked gauge wheel rims and spoke stiffener. Designed for XP planters. Hardware included.

LANRE278847

Category 5 drawbar to category 4 drawbar pin conversion kit.

LANRE311210

Tow cable kit for John Deere® 9XXXR 4-wheel drive tractors.

LANRE315780

Tow cable kit for John Deere® 9X30 articulated 4-wheel drive tractors.

LANRH420T

Front mount tow hitch that mounts to pre-existing holes in the frame. All hardware is provided.

LANRH430T

Front mount tow hitch for John Deere® 9030T Series tractors.

LANS500

Supports to keep PTO drivelines secure when head is not in use.

LANS850

Supports to secure hex shaft drive lines when not in use.

LANSS1240/90R12

Generation II Stalk Stomper® mounting kit for a 12 row John Deere® 40/90 Series corn head. (12 row coverage)

LANSS2600XO

Stalk Stomper® mount kit for a pair of rows on a Case IH® 2600 Series chopping corn head.

LANSS3408R2

Generation II Stalk Stomper® mounting kit for CaseIH® 3208/3408 30" Series corn heads. (2 row coverage)

LANSS3408R4

Generation II Stalk Stomper® mounting kit for CaseIH® 3208/3408 30" Series corn heads. (4 row coverage)

LANSS3408R8

Generation II Stalk Stomper® mounting kit for CaseIH® 3208/3408 30" Series corn heads. (8 row coverage)

LANSS3412R12

Generation II Stalk Stomper® mounting kit for CaseIH® 3212/3412 30" Series corn heads. (12 row coverage)

LANSS3412R2

Generation II Stalk Stomper® mounting kit for CaseIH® 3212/3412 30" Series corn heads. (2 row coverage)

LANSS3412R4

Generation II Stalk Stomper® mounting kit for CaseIH® 3212/3412 30" Series corn heads. (4 row coverage)

LANSS3412R6

Generation II Stalk Stomper® mounting kit for CaseIH® 3212/3412 30" Series corn heads. (6 row coverage)

LANSS4090X

Stalk Stomper mounting kit for John Deere® 40 and 90 Series corn heads. (2 row coverage)

LANSS4408R2

Generation II Stalk Stomper® mounting kit for CaseIH® 2608/4208/4408 30" Series corn heads. (2 row coverage)

LANSS4408R4

Generation II Stalk Stomper® mounting kit for CaseIH® 2608/4208/4408 30" Series corn heads. (4 row coverage)

LANSS4408R8

Generation II Stalk Stomper® mounting kit for CaseIH® 2608/4208/4408 30" Series corn heads. (8 row coverage)

LANSS4412R12

Generation II Stalk Stomper® mounting kit for CaseIH® 2612/4212/4412 30" Series corn heads. (12 row coverage)

LANSS4412R2

Generation II Stalk Stomper® mounting kit for CaseIH® 2612/4212/4412 30" Series corn heads. (2 row coverage)

LANSS4412R4

Generation II Stalk Stomper® mounting kit for CaseIH® 2612/4212/4412 30" Series corn heads. (4 row coverage)

LANSS4412R6

Generation II Stalk Stomper® mounting kit for CaseIH® 2612/4212/4412 30" Series corn heads. (6 row coverage)

LANSS600CSB

Supplementary kit for John Deere® 600 Series corn heads that are utilizing factory storage stand kits.

LANSS600PLYK

Poly skid shoe that can be added to both the first and second generation Lankota Stalk Stomper® shoes.

LANSS606R2

Generation II Stalk Stomper® mounting kit for a John Deere® 606C Series corn head. (2 row coverage)

LANSS606R4

Generation II Stalk Stomper® mounting kit for a John Deere® 606C Series corn head. (4 row coverage)

LANSS606R6

Generation II Stalk Stomper® mounting kit for a John Deere® 606C Series corn head. (6 row coverage)

LANSS608R2

Generation II Stalk Stomper® mounting kit for a John Deere® 608C Series corn head. (2 row coverage)

LANSS608R4

Generation II Stalk Stomper® mounting kit for a John Deere® 608C Series corn head. (4 row coverage)

LANSS608R8

Generation II Stalk Stomper® mounting kit for a John Deere® 608C Series corn head. (8 row coverage)

LANSS612R12

Generation II Stalk Stomper® mounting kit for a John Deere® 612C Series corn head. (12 row coverage)

LANSS612R12HYD

Generation II Stalk Stomper® hydraulic mounting kit for a John Deere® 612C Series corn head. (12 row coverage)

LANSS612R12N

Generation II Stalk Stomper® mounting kit for a John Deere® 20" or 22" 612C Series corn head. (12 row coverage)

LANSS612R2

Generation II Stalk Stomper® mounting kit for a John Deere® 612C Series corn head. (2 row coverage)

LANSS612R4

Generation II Stalk Stomper® mounting kit for a John Deere® 612C Series corn head. (4 row coverage)

LANSS612R6

Generation II Stalk Stomper® mounting kit for a John Deere® 612C Series corn head. (6 row coverage)

LANSS616R16

Generation II Stalk Stomper® mounting kit for a John Deere® 616C 30" Series corn head. (16 row coverage)

LANSS616R2

Generation II Stalk Stomper® mounting kit for a John Deere® 616C 30" Series corn head. (2 row coverage)

LANSS616R4

Generation II Stalk Stomper® mounting kit for a John Deere® 616C 30" Series corn head. (4 row coverage)

LANSS616R6

Generation II Stalk Stomper® mounting kit for a John Deere® 616C 30" Series corn head. (6 row coverage)

LANSS618R18

Generation II Stalk Stomper® mounting kit for a John Deere® 618C 22" Series corn head.

LANSS618R2

Generation II Stalk Stomper® mounting kit for a John Deere® 618C 20" Series corn head. (2 row coverage)

LANSS618R4

Generation II Stalk Stomper® mounting kit for a John Deere® 618C 20" Series corn head. (4 row coverage)

LANSS618R6

Generation II Stalk Stomper® mounting kit for a John Deere® 618C 20" Series corn head. (6 row coverage)

LANSS650F2

Generation II Stalk Stomper® mounting kit for under the feeder house of John Deere® corn heads. (2 row coverage)

LANSS650F4

Generation II Stalk Stomper® mounting kit for under the feeder house of John Deere® corn heads. (4 row coverage)

LANSS651

Generation II Stalk Stomper "shoe" with torsion spring; without poly

LANSS651BLK

Generation II Black Stalk Stomper "shoe" with torsion spring; without poly

LANSS655

Generation II Stalk Stomper "shoe" with torsion spring; with poly

LANSS655BLK

Generation II Stalk Stomper "shoe" with torsion spring; with poly (Black)

LANSS658

Flip up mount to move the Stalk Stomper® shoe up and out of the way when loading the head onto a cart.

LANSS6X

Generation II Stalk Stomper® flip up mounts for John Deere® 600 Series heads. 2 row kit.

LANSS840/90R2

Generation II Stalk Stomper® mounting kit for an 8 row John Deere® 40/90 Series corn head. (2 row coverage)

LANSS840/90R4

Generation II Stalk Stomper® mounting kit for an 8 row John Deere® 40/90 Series corn head. (4 row coverage)

LANSS840/90R8

Generation II Stalk Stomper® mounting kit for an 8 row John Deere® 40/90 Series corn head. (8 row coverage)

LANSSBXE10423

Lankota Stalk Stomper® storage stand kit.

LANSSCIH20/30

Stalk Stomper® mounting kit for Case IH® 2400 and 3400 Series corn heads. (2 row coverage)

LANSSCRPK

Stainless steel corn hood plate kit for John Deere® 90 and 600 Series poly corn heads.

LANTBWP-12

Set of 12 stainless steel cover plates and hardware for John Deere® wide spread tailboard spreader blades.

LANTH300

Heavy duty solid hitch for John Deere® 00, 10, 50, and 60 Series combines.

LANTH400

Heavy duty solid hitch for John Deere® 70 and "S" Series combines.

LANTH910

Heavy duty folding and telescoping hitch for John Deere® 70 and "S" Series combines.

LANTS93

Stalk Stomper® bracket for John Deere® 9X30 articulated tractors.

LANTS9R

Stalk Stomper® bracket for John Deere® 9XX0R articulated tractors.

LANTSB80G

80" x 5" x 5" toolbar for Lankota tractor Stalk Stomper® kits.

LANTSB96G

96" x 5" x 5" toolbar for Lankota tractor Stalk Stomper® kits.

LANTSS24

24" wide Lankota tractor Stalk Stomper® Shoe and mounts.

LANTSS40

40" wide Lankota tractor Stalk Stomper® Shoe and mounts.

LANXB1340

1⅛" female hex to 1⅜" 21 spline 1000 RPM male adapter.

LANXB1720

1¼" round female to 1⅛" hex male adapter.

LANXB540

1⅛" female hex to 1⅜" 6 spline male 540 RPM adapter.